Lecol 5500 Adhesive, 25kg

£125.81 - per can, Inc. VAT£104.84 - per can, Ex. VAT

Lecol alcohol-based Parquet Adhesive 5500 can be used for all types of wood and is suitable for installation on absorbent and non-absorbent subfloors; i.e.: it can be universally applied. In many case...

Can(s):


SKU
122489
Category
Tags
Floor Fitting Products, Adhesives

  • Product Description

    Lecol alcohol-based Parquet Adhesive 5500 can be used for all types of wood and is suitable for installation on absorbent and non-absorbent subfloors; i.e.: it can be universally applied. In many cases, it can even be used to install a pre-finished parquet without any problems.

    The main properties of the Lecol Parquet Adhesive 5500 are:

    • Universally applicable
    • Ready to use
    • Very strong adhesion
    • High filling capacity
    • High level of initial grab
    • Consumption per m²: 1kg

    Lecol 5500 can be used with an underfloor heating system. Before laying, the heater should have been in service for at least 10 days. Turn the heating off 2 days before laying or lower the thermostat in winter. Switch the heating back on again at a low setting 3 days after laying.

  • Specification

    Adhesives Specification
    Component BaseQuick polyvinylacetate based glue and has high shear strength.
    Storage & TransportationDo not use at a temperature below +10°C, Do not store below +5°C, Protect from frost.
    Shelf LifeShelf life approx 6 months
    CleaningThe tools can be cleaned with water, dried glue with acetone
    Other FeaturesDo not use below + 20°C or above 65% relative air humidity. During cold weather periods warm up
    Pack Size25kg
    Drying Time30 minutes

Related Products