0

020 88309788

SUBTOTAL:  £0.00
VAT:  £0.00
TOTAL:   £0.00TOTAL:  £0.00
View Basket
INC. VATEX. VAT
Blanchon Easy Oil, Satin, 2.5L Image 1

Blanchon Easy Oil, Satin, 2.5L

£68.80 - per can, Inc. VAT£57.33 - per can, Ex. VAT

Blanchon Easy Oil in Satin, 2.5L, is a traditional impregnating oil designed for wood floors and all interior woodwork. Smooth with a high-build consistency, Easy Oil is easy to apply, requiring no...

Can(s):
SKU
06600111
Category
Tags
Floor Finishing Products, Hardwax & Oil

  • Product Description

    Blanchon Easy Oil in Satin, 2.5L, is a traditional impregnating oil designed for wood floors and all interior woodwork.

    • Smooth with a high-build consistency, Easy Oil is easy to apply, requiring no buffing or wiping.
    • It deeply penetrates wood surfaces, offering long-term protection with excellent chemical and mechanical resistance.
    • Available in two finishes: satin and ultra-matt.
    • The easy roller application, without buffing, makes it convenient for users.

    Directions for use:

    • Easy Oil is ready to use without mixing.
    • Stir well before use.
    • Do not apply when the temperature is below 12°C. Ensure good ventilation in the application area.
    • Apply a thin first coat with a short-haired roller, following the wood grain or, if not possible, the direction of light. Use a brush or graining brush for the edges. A spray gun is suitable for vertical surfaces, furniture, and worktops.
    • After drying, sand the surface with fine abrasive paper, thoroughly dust, and wipe with a damp microfiber mop to remove any final traces of dust.
    • Apply the second coat using the same method as the first.
    • Do not wait more than 48 hours between coats.
    • Easy Oil is compatible with industrial roller coaters.

    Coverage:

    • Initial oiling on a sanded wood floor: 25 sq/m per litre per coat.
    • Maintenance oiling: 25 to 35 sq/m per litre per coat.

  • Specification

    Sealant & Lacquer Specification
    Coverage25 - 35m²/L
    Component BaseOne Component
    Drying TimeApprox. 8-10 hours
    Density0.87 (at 20°C, as per NF T 30020)
    ViscosityBROOKFIELD (Spindle 2, Speed 100 rpm at 20°C) 250 centipoises
    Application ToolsRoller, brush
    Pack Size2.5L
    Type of FinishSatin